405 Tidwell Dr, Alpharetta, GA, 30004
Mon-Fri 07:30 AM - 05:30 PM
Electrical underground boring, also known as horizontal directional drilling (HDD), has revolutionized the installation of underground electrical conduits and utilities. This trenchless method offers a non-intrusive way to lay cables beneath roads, rivers, and structures without the need for extensive excavation or the disruption of surface activities. It is particularly favored in urbanized areas where surface trenching can be costly, time-consuming, and cause significant disturbances to traffic and residents.
The process starts by drilling a pilot hole along a designated path using a specialized drilling rig. Once the pilot hole is established, it is enlarged to accommodate the utility. The electrical conduits are then pulled back through this enlarged hole, establishing an underground path for electricity. This method ensures minimal ground disturbance and is both time-efficient and cost-effective.
Moreover, electrical underground boring reduces the environmental impact as it minimizes land disruption and potential damage to surrounding habitats. It offers increased safety since the risk of utility strikes is significantly reduced. HDD has indeed presented a win-win solution for modern urban planning, emphasizing sustainability and efficiency in utility installation.
1. Planning and Preparation:
* Site Survey: Inspect the area to determine the best path for the bore. Locate existing utilities using utility locators or calling the local utility notification center.
* Design the Bore Plan: Depending on the complexity of the area, you might need software to plot the best path. This plan will specify entry and exit points, depth of the bore, and any curves or angles.
* Obtain Necessary Permits: Before starting the work, make sure you have all required permits from local authorities.
2. Setup the Drilling Equipment:
* Choose the appropriate drilling rig based on the diameter of the conduit and the length of the bore.
* Prepare the drilling fluid (often a mix of water and bentonite) which will be used to lubricate and stabilize the borehole.
* Position the drill rig at the designated starting point.
3. Pilot Bore:
* Begin drilling a pilot bore following the planned path. The drilling head will be equipped with a location device so its position can be tracked from the surface.
* Adjust the direction and depth as necessary based on real-time tracking data.
4. Reaming:
* After the pilot bore is complete, the hole may need to be enlarged to accommodate the conduit. This is done by pulling a larger cutting tool (reamer) back through the pilot hole, often in multiple passes.
* Ensure that the hole is of the appropriate size and is stable. Continue to use drilling fluid during this process to maintain the borehole.
5. Pullback:
* Attach the electrical conduit to the reaming tool.
* Slowly pull the conduit back through the borehole while ensuring it doesn’t get tangled or damaged.
* Once the conduit is in place, make sure to test its integrity and ensure it’s properly sealed at both ends.
Great service from the initial phone call to the techs that came out. They came out quickly, contacted me before to let me know they were on the way and arrived ahead of schedule. Techs were professional and knowledgeable. They efficiently fixed my issues and charged a fair price. I highly recommend them!
Extremely satisfied by the installation of a manual transfer switch and power inlet for my portable electric start portable Champion generator. A nice clean installation by Victor and Edwin that only took a few hours to complete.
What is impressive is the prompt and thorough communications from Meer regarding the first estimate appointment, recommendations for the most economical options, quick follow-up scheduling, location tracking provided of installation team for the day of the appointment, communications with installation team to ensure I was satisfied with the service.
Just absolutely stellar customer service, way beyond expectations. Very well planned, their experience was demonstrated and was executed as a pro-active customer service, versus the typical reactionary customer service experienced with majority of service companies in our area today.
I contacted 13 companies for this job – 4 no return phone calls, 4 estimates in person and discounted 5 from any further communications as they were totally unprofessional. 3 of the estimate companies ghosted me after submitting estimates! The job was 4 figures, not $50 and worth their while.
If all our interactions with vendor businesses were as exceptional as experienced with Meer, it would be a pleasure to hire contractors for work. Meer sets an extremely high standard that is probably not approachable by 99% of the companies servicing our area today with various services, because other businesses just don’t seem to care enough about their customers – as the ongoing growth of Atlanta has kept them in business despite their haphazard service that would have put them out of business anywhere else.
Meer could be an expert trainer or consultant for these other businesses, as their customer service and expertise in their services provided are THAT FANTASTIC! Best service company I have ever worked with in Georgia, bar none, over the past 20 years.
